V&A Power Of making

Robot News & Announcements

V&A Power Of making

Postby Matt Denton » Fri Sep 16, 2011 8:08 am

Ok, so it's a bit short notice but I will be at the V&A museum, London tomorrow demonstrating a couple of hexapod including iC. If anyone happens to be around drop in and say hi.

http://www.vam.ac.uk/content/articles/p/power-of-making/
Matt Denton
AKA: Winchy_Matt

micromagic systems ltd
Matt Denton
Site Admin
 
Posts: 1622
Joined: Tue May 20, 2008 9:15 pm
Location: Winchester UK

Re: V&A Power Of making

Postby gonzokawasaki » Fri Oct 21, 2011 5:59 pm

hi

i was wondering if the hexapod was still there as part of the exhibition or was it just for the day?

I also heard a rumour that a hexapod would be on permanent display at Kinetica? Is that right?
gonzokawasaki
 
Posts: 8
Joined: Fri Oct 21, 2011 5:51 pm
Location: london

Re: V&A Power Of making

Postby Matt Denton » Sat Oct 22, 2011 3:18 pm

Hi,

No iC was only there for the one day, although they do have two of my other hexapods on static display.
Matt Denton
AKA: Winchy_Matt

micromagic systems ltd
Matt Denton
Site Admin
 
Posts: 1622
Joined: Tue May 20, 2008 9:15 pm
Location: Winchester UK

Re: V&A Power Of making

Postby innerbreed » Sat Oct 22, 2011 5:22 pm

be sure to give us notice next time matt. :x
innerbreed
 
Posts: 154
Joined: Mon Jun 29, 2009 4:43 pm
Location: Cambridge UK

Re: V&A Power Of making

Postby gonzokawasaki » Sun Dec 11, 2011 11:23 am

I was at the V and A and saw the 2 dormant hexes :/ (shame they werent alive) I was at the science museum to see the Robotville exhibition and popped into the V and A.

The Robotville was v cool it was completely sold out so a friend got me a spare ticket. There werent any hexes but some amazing machines particularly the ones with good sense integration.

@ Matt I was half thinking you might have been there with your hex i think it would have gone down a storm.

I hope these kinds of work is exhibited more throughout the country.

http://www.sciencemuseum.org.uk/robotville

kieron
gonzokawasaki
 
Posts: 8
Joined: Fri Oct 21, 2011 5:51 pm
Location: london

Re: V&A Power Of making

Postby Matt Denton » Sun Dec 11, 2011 3:51 pm

I was invited to present a 15min talk during the robotville exhibition, but I decided I had too much on my plate as it was! I must try to get to see it but I think I will be too busy.
Matt Denton
AKA: Winchy_Matt

micromagic systems ltd
Matt Denton
Site Admin
 
Posts: 1622
Joined: Tue May 20, 2008 9:15 pm
Location: Winchester UK

Re: V&A Power Of making

Postby gonzokawasaki » Sun Dec 11, 2011 6:57 pm

from what i understand it was only that weekend.
gonzokawasaki
 
Posts: 8
Joined: Fri Oct 21, 2011 5:51 pm
Location: london


Return to News

Who is online

Users browsing this forum: No registered users and 1 guest

cron