SSC-32 servo controller firmware and bootloader source code!

Post code examples here

SSC-32 servo controller firmware and bootloader source code!

Postby JaponezuMascat » Tue Apr 05, 2011 7:28 pm

Here you fill find the source code of the SSC-32 servo controller firmware and bootloader! I know that people are not able to find these files because they don't allow any more to download them..but you can download them from here! SSC-32 is a great board to use with Arduino! Specially when you build hexapod robots :D

Download SSC-32 firmware source code for (Atmega8 and Atmega168) from here:
http://ssc32.125mb.com/ssc-32-gcc-1.06XE.tar.bz2
http://ssc32.125mb.com/ssc-32-gcc-2.02GP.tar.bz2

Download SSC-32 bootloader source code (Atmega8 and Atmega168) from here:
http://ssc32.125mb.com/avr-loader-0.1.tar.bz2

For more info ----> http://ssc32.125mb.com/
JaponezuMascat
 
Posts: 1
Joined: Tue Apr 05, 2011 7:21 pm

Return to Code Examples

Who is online

Users browsing this forum: No registered users and 1 guest

cron