Useful link on DIY anodising

Engineering discussions / projects / advice / questions

Useful link on DIY anodising

Postby jaspinall » Tue Sep 30, 2008 11:43 am

I've gleaned a lot of info from the destructions that came with my anodising kit... This is a useful site also:

http://astro.neutral.org/anodise.shtml
Jason Aspinall
Electro-Mechanical Design Engineer & Freelance Photographer
http://www.chilledatthebottom.com
PLEASE DO NOT PRIVATE MESSAGE ME ASKING FOR DESIGN FILES
THEY ARE EXCLUSIVE TO ME AND ARE NOT FOR DISTRIBUTION OR FOR SALE
jaspinall
 
Posts: 333
Joined: Mon Jun 30, 2008 8:29 am
Location: Barry, South Wales

Re: Useful link on DIY anodising

Postby jaspinall » Tue Sep 30, 2008 11:48 am

Jason Aspinall
Electro-Mechanical Design Engineer & Freelance Photographer
http://www.chilledatthebottom.com
PLEASE DO NOT PRIVATE MESSAGE ME ASKING FOR DESIGN FILES
THEY ARE EXCLUSIVE TO ME AND ARE NOT FOR DISTRIBUTION OR FOR SALE
jaspinall
 
Posts: 333
Joined: Mon Jun 30, 2008 8:29 am
Location: Barry, South Wales

Re: Useful link on DIY anodising

Postby Matt Denton » Tue Sep 30, 2008 1:20 pm

Nice one, you should add a bit about your barell de-burring process here too! :)
Matt Denton
AKA: Winchy_Matt

micromagic systems ltd
Matt Denton
Site Admin
 
Posts: 1622
Joined: Tue May 20, 2008 9:15 pm
Location: Winchester UK

Re: Useful link on DIY anodising

Postby jaspinall » Tue Apr 05, 2011 12:36 pm

ZOMG!!! Just checked the date on this thread!

I cannot believe it's been 2.5 years since I built my hex!!

I actually dug out my barrelling machine the other day, currently still living under the workbench that my MDX-540 sits on...Must put it to good use again one day!

Perhaps my Robot Arm (thread elsewhere in the Projects area) bits might be short enough to get in the barrel...
Jason Aspinall
Electro-Mechanical Design Engineer & Freelance Photographer
http://www.chilledatthebottom.com
PLEASE DO NOT PRIVATE MESSAGE ME ASKING FOR DESIGN FILES
THEY ARE EXCLUSIVE TO ME AND ARE NOT FOR DISTRIBUTION OR FOR SALE
jaspinall
 
Posts: 333
Joined: Mon Jun 30, 2008 8:29 am
Location: Barry, South Wales


Return to General

Who is online

Users browsing this forum: No registered users and 4 guests

cron