Hi! I've some questions about the MSR-H01 Hexapod Kit.
Can I control it with this solution: DFRduino mega2560 V2.0 + Mega IO Expansion Shield For Arduino Mega V1.2?
With this solution can I connect all 18 servo motors on the shield or I need others boards?
If I use this controller, there is a delay when I send commands to servo motors?
Thanks!
Control the MSR-H01 Hexapod Kit with Arduino
3 posts
• Page 1 of 1
Control the MSR-H01 Hexapod Kit with Arduino
by Piero78 » Fri Jun 08, 2012 12:01 pm
- Piero78
- Posts: 1
- Joined: Fri Jun 08, 2012 10:22 am
Re: Control the MSR-H01 Hexapod Kit with Arduino
by Matt Denton » Fri Jun 08, 2012 12:15 pm
Sorry, I have no experience with the Arduino platform and what it is capable of, so can't offer any advise.
- Matt Denton
- Site Admin
- Posts: 1556
- Joined: Tue May 20, 2008 9:15 pm
- Location: Winchester UK
Re: Control the MSR-H01 Hexapod Kit with Arduino
by DiaLFonZo » Sat Sep 15, 2012 11:47 am
Take a look here
https://github.com/KurtE/Phoenix-Code/t ... tBoarduino
https://github.com/KurtE/Phoenix-Code/t ... tBoarduino
- DiaLFonZo
- Posts: 21
- Joined: Sun Oct 31, 2010 4:06 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest