Spare parts, MSR-H01-FEMUR

Hexapod Robots

Spare parts, MSR-H01-FEMUR

Postby quadrocopter » Fri Jan 29, 2010 1:39 am

Hello Matt,
Do you sell MSR-H01 FEMUR as a spare part?
The combination "nylon" servo horns and no axial support make in my opinion femur leg unstable.
I want to add extra axial support on the back of the Femur and Tibia servo and then add an extra MSR-H01-FEMUR to make the leg construction more stable.

Any comments?

-Frank-
quadrocopter
 
Posts: 6
Joined: Sun Nov 22, 2009 11:23 am
Location: Norway

Re: Spare parts, MSR-H01-FEMUR

Postby innerbreed » Fri Jan 29, 2010 11:19 pm

i believe there has been talk about maybe adding spares to the inventory. so keep an eye out.
your right adding the extra femur will make it stronger. here is how i done mine:
Image
I might sell them.... ;)
innerbreed
 
Posts: 154
Joined: Mon Jun 29, 2009 4:43 pm
Location: Cambridge UK

Re: Spare parts, MSR-H01-FEMUR

Postby quadrocopter » Sat Jan 30, 2010 12:14 am

Nice!

I found these at Lynx, would rather have glued them instead of than using the double sided tape.Image

My mistake was that I ordered HS-5625, instead of spending a few more $ for the robotic version HSR-XXXX that have axial support.

-Frank-
quadrocopter
 
Posts: 6
Joined: Sun Nov 22, 2009 11:23 am
Location: Norway

Re: Spare parts, MSR-H01-FEMUR

Postby Matt Denton » Sun Jan 31, 2010 7:01 pm

quadrocopter wrote:Hello Matt,
Do you sell MSR-H01 FEMUR as a spare part?
The combination "nylon" servo horns and no axial support make in my opinion femur leg unstable.
I want to add extra axial support on the back of the Femur and Tibia servo and then add an extra MSR-H01-FEMUR to make the leg construction more stable.

Any comments?

-Frank-



You could replace the nylon horns with aluminium horns, they should fit the same hole pattern. :?:
Matt Denton
AKA: Winchy_Matt

micromagic systems ltd
Matt Denton
Site Admin
 
Posts: 1622
Joined: Tue May 20, 2008 9:15 pm
Location: Winchester UK


Return to Hexapods

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron