Metal Skull Robotics Hexapod Project

Hexapod Robots

Re: Metal Skull Robotics Hexapod Project

Postby Matt Denton » Fri Nov 07, 2008 5:13 pm

MetalSkullRobotics wrote:Matt,

I’m currently helping on a robotics stand at a hobby/miniature event in Leeuwarden – the Netherlands. I brought my hexapod as static and there’s loads of visitors who are interested in the hexapods and robots in general. Can I forward them to your site (hexapodrobot) if they want any further information?

Cheers Dennis and greetings from Leeuwarden!


Yes of course.. no problem :)
Matt Denton
AKA: Winchy_Matt

micromagic systems ltd
Matt Denton
Site Admin
 
Posts: 1622
Joined: Tue May 20, 2008 9:15 pm
Location: Winchester UK

Re: Metal Skull Robotics Hexapod Project

Postby MetalSkullRobotics » Fri Nov 07, 2008 6:55 pm

I set up a live video feed from here!

http://www.metalskullrobotics.nl/webcam.html
MetalSkullRobotics
 
Posts: 68
Joined: Tue Jun 03, 2008 1:19 pm
Location: Zoetermeer, the Netherlands

Re: Metal Skull Robotics Hexapod Project

Postby MetalSkullRobotics » Mon Nov 10, 2008 12:22 pm

[youtube=<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/bFjrPOlRdxE&hl=nl&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/bFjrPOlRdxE&hl=nl&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>][/youtube]
MetalSkullRobotics
 
Posts: 68
Joined: Tue Jun 03, 2008 1:19 pm
Location: Zoetermeer, the Netherlands

Re: Metal Skull Robotics Hexapod Project

Postby wattsie » Mon Sep 07, 2009 11:54 am

Has there been any progress on this hex??

I was really looking forward to seeing it up and running, I liked the perspex!

wattsie
wattsie
 
Posts: 49
Joined: Mon Aug 11, 2008 12:07 am

Re: Metal Skull Robotics Hexapod Project

Postby MetalSkullRobotics » Mon Sep 07, 2009 2:10 pm

Hello wattsie,

due to other more important time consuming activities I didn't make any progress yet. I still got the perspex frame with all the servos mounted but need to work on the electronics.

The electronics are always the hardest, the (electronic) hardware/software takes the most time. And I don't really have the time at the moment :(

If I make any progress I will let you guys know.

Cheers Dennis
MetalSkullRobotics
 
Posts: 68
Joined: Tue Jun 03, 2008 1:19 pm
Location: Zoetermeer, the Netherlands

Previous

Return to Hexapods

Who is online

Users browsing this forum: No registered users and 1 guest

cron