|
This pan & tilt head kit for the MSR-H01 hexapod consists of 3mm black acrylic plates and all fixtures and fittings required for assembly. The kit requires one HS-225BB or HS-225MG servo and one standard size servo such as HS-311 or HS-322 which are not included. The tilt operation can be mounted in one of two ways to give either +60 / - 16 degrees or -60 / +16 degrees of range.
On-Line Assembly Instructions can be found HERE.
The front plate of the pan & tilt head has two 3mm mounting holes 20mm apart for direct mounting of sensors or additional front plate with sensors. The front plate can be directly replaced with an SRF08 range finder module.
Items you may also require:
|
